Category Archives: Wi-Fi Connectivity Issues

How to Solve AP Currently Not In Use Internet Connection Slow

It happens that when you install a new Internet Connection, your PC begins connecting with the internet. The weird thing is that your android mobile doesn’t connect with a newly established network. You might receive the error that AP currently not in use internet connection slow.

We also have had cases where Samsung galaxy note 4 and other devices returns an error that “AP currently not in use internet connection slow on Samsung galaxy note 4”. 

Well, we will help you solve the problem of ap currently not in use internet connection slow in this article.

There are many reasons for this kind of errors. It might be because of the router you are using or maybe you need to do some slight settings on your mobile.

It is quite evident that internet on our mobile devices. You may have the fastest and strong connection at home, but if you find your device loading slowly, struggling to connect to the network or maybe dropping your connection then in no time you will find yourself staring at an ‘AP Currently Not In Use’ error message.

The funny thing about this error is that it does pop up even if you entered the correct password and you have all the correct information.

This problem is annoying and can give you a headache if you don’t know how to handle it. Fortunately, it is easy to rectify internet problems on android devices. Just read on to figure out what to do if you come across this error message.    

Reasons for AP Currently Not In Use Internet Connection Slow

Mostly, you will run into this error message if the mobile or PC you are using fails to detect your Access Point (AP). Also, this may occur if your device has an illusion that your Access Point is not being used.

In this situation, the Access Point could be a wireless router that is accessing the internet via a range extender, maybe your wireless dongle or anything or any internet access service provider.

In most cases, the primary reason that could cause your device to think that there is no AP could be because it is having problems in connecting to the network.

At times if you take a look at your router and observe its signal strength on your phone, you will notice that it is weak.

Also, another reason that is quite obvious is the fact that mobile phones cannot pick up wifi signals effectively the way computers or laptops do. It is not always a guarantee that you will have access to a strong signal on your smart phone. Your computer could reflect that you have a good connection but your smart phone won’t.

Each device is different from another and each has different capabilities.

But not to worry, there are ways to get this fixed. Keep reading on to know how to fix this problem.

Possible reasons for AP currently not in use

There are many reasons for this problem some as we have mentioned above. However, before you move on to possible solutions, here are some other highlights that could lead to ap currently not in use internet connection slow?

  1. Router need to restart.
  2. Your phone has checked the poor connection.
  3. The speed of your network maybe too slow.
  4. The network has still previous Connection.

These are many other possible reasons for AP Currently not in use which means that there might be a lot of other problems but we have discussed them as one.

Failed to Obtain IP Address:

The Ap currently not in use could also be lead to the Failed to obtain IP Address error. The methods that we have listed below can help you solve your problem. If it happens that you get any of the two errors i.e. Failed to obtain IP address or AP currently not in use internet connection slow please know that both are interconnected.

Fix 1: Uncheck Poor Connection in Android Phone:

Sometimes you will find your mobile phone with a poor connection because you checked the poor connection option. You can fix this error once and for all if you ignore or avoid this poor connection.

AP currently not in use -uncheck poor connection
  1. First go to Settings in your Android phone.
  2. Then tap on the Wi-Fi option.
  3. Click on Menu option at the top or the three dots.
  4. Choose Advanced Settings to see a list of other options.
  5. Now uncheck the Avoid Poor Connections that is checked. If the option is not checked, check it and reboot your phone. Then repeat these instructions.
  6. Restart your phone and try connecting to the network again.

Also, if you tried this method and it does not work for you then go to the next solution of ap currently not in use internet connection slow.

Just one point to keep in mind – not every phone may have this option – perhaps older models may not have this feature – if that is the case, just check out our other tips – one of them should work for you!

Fix 2:  Restart your Phone

Sometimes a quick restart could work wonders. A simple restart has been proved to work in most cases because a phone just like a human’s brain has to refresh.

There are a lot of activities that go on during a restart. Some of these activities are:

  • The phone cools down
  • It refreshes all the running programs
  • It closes the programs that might be interfering with the connection
  • Resets the phone to normal start-up operations

That said, in this solution, one has to restart their. This method has been proved to solve the problem in Android and tablet.

If this method doesn’t work on your device, you can try another method listed below.

Fix 3: Restart your Router

As mentioned above, a simple restart can get this troubling issue fixed.

To do this,

  • Unplug the power cable of your router for 1-2 minutes.
  • Plug in the power again.
  • Wait for few seconds until connection starts appearing.
  • That is it, connect your phone to Wi-Fi again.

Or, you can simply reboot your Router by clicking on the router restart button.

I believe that this method will definitely solve your the ap currently not in use internet connection slow problem.

However, if this method still doesn’t solve the problem, move on and try the next solution.

Fix 4: Uncheck Automatic Time and Date and fix ap currently not in use 

There are cases where the automatic time set by your phone could be invalid. It is one of the best features that almost all the phones come with but sometimes it might just give a wrong time zone.

The automatic date and time set by your phone could be right for another location but not the exact figures for your ideal time zone. Therefore, disabling the automatic time and date could fix ap currently not in use problem.

It is simple to disable this feature, just uncheck the date and time

  1. Head over to all applications on your mobile phone and tap on the settings icon.
  2. Find System.
  3. Now tap on the Date and Time option on your mobile phone.
  4. Uncheck the Date and Time.
AP currently not in use  -automatic date and time
  1. Find a phone that has the correct time or run a search on Google your time by location using a different phone.
  2. Set the current time, date and time zone appropriately.
  3. Now check the automatic date and time again so that the time updates when you restart your device
  4. Restart your phone and connect to Wi-Fi again.

That should solve the problem but if it persists, try the fixes from the below methods.

You’d be surprised, some problems pop up simply because your phone could be set to 10 years from now, or even gets reset to the day you bought your device or the date your device was manufactured. Simply follow the steps above. Restart your phone too for this to take effect.

Fix 5: Forget Wi-Fi password and Re-Enter Password Again

It turns out that there are no technical fixes to clear this error if you have noticed. The slight changes we make are exactly what should be done. Please don’t skip even a single step in each solution fix.

Forgetting the wifi password and then keying it again could fix this problem. It is important because you might be trying to connect to the wifi connection and yet you had changed the password or other settings on the router.

If you forget the connection and connecting back to it, the phone will reconnect with the current settings and configurations of your router.

Important right?

Follow the steps to forget the password and fix ap currently not in use internet connection slow.

  1. Go all apps the select Settings 
  2. Next tap on the  Wi-Fi option.
  3. Select the Wi-Fi network tab.
  4. Now click on the Forget option.
  5. Restart your phone to apply these changes
  6. When the phone is on, reconnect to the network and Re-Enter the password of your Wi-Fi network again.

This should fix the error.

Other quick fixes

1.   Check which connection you are on,

You should check the connection you are trying to connect to. If one connection is bringing problems then try a different one.

Your wireless router should have two bandwidths – 2.4GHz and 5GHz. Therefore, if it happens that you have a weak signal in any of the two bandwidths maybe on 2.4GHz then conect to the other band.

Remember, being connected is not an assurance that you will have a strong signal all time but knowing which network you are connecting to will help you determine if you are going to enjoy an optimum internet experience.

2.     Shift the location to fix AP currently not in use

It may sound unprofessional to move your position but trust me, it works.

The shift location rule applies to mostly every field, and it remains true for getting a good connection as well.

All you need to do is to move your device to a closer position to your wireless router or Access Point.

You can move your work desk (workstation) closer or to a position which has fewer or no obstacles and also the place should have less or no interference from other wireless devices.

Places with many obstacles could affect the bandwidth performance of your wireless router. Wall, metal, household gadgets like microwaves and others should be avoided. Make sure that you set your router in the same room you want to use your devices.

Distancing yourself away from these obstacles will ensure that you do not see the ‘AP currently not in use’ error message.

3.     Utilise a Static IP address instead of a dynamic one. 

Using a static IP address means that your IP address will remain constant. It will not change every time you restart your wireless router the like it is the case with the dynamic IP address. It is a simple solution, and all you have to do is know the DHCP range of your network, and insert an IP address that is outside your network’s DHCP range but within the boundaries o your network subnet.

AP currently not in use  -static IP address
  1. Tap the Settings icon from the list of applications.
  2. Go to Wi-Fi Network and then tap the Forget Password option.
  3. Afterward, hit the Network tab once again.
  4. Make sure that you check the 2 checkboxes on the next window.
  5. Scroll down until you see either DHCP or Static options.
  6. Select the Static option and then enter your computer’s IP address.
  7. Wi-Fi will Connected.

If this quick solution did not work, we recommend that you try these other solutions listed below.

1.     Upgrading your wireless router to fix AP currently not in use

Sometimes upgrading your wireless internet provider device could be a solution to your problems. It is the last thing you should think of if all the above fixes did not fix your issues.

We have listed it as the last option because we don’t want you to suddenly go out and buy a whole new device if it is not needed.

If the above tips don’t work for you, let us know about the problems you are facing with AP currently not in use error in the comments below and we’ll try to find a workable solution for you!

Final Words about ap currently not in use internet connection slow

Finally we have we reach a mutual conclusion that there might be multiple problems of your Wi-Fi network.

We have discussed the many possible fixes or solutions to solve ap currently not in use. If above methods don’t solve your problem then this issue must be caused by a technical occurrence with the Network Configuration.

Sometimes you may have to reconsider what device you are using. Your device or even the wireless router you have could be an older model which can slow down your network unexpectedly.

It is true that we buy or rent a wireless router which may not live up to its expectations. In fact, if you are renting your wireless router, you may be having one that is not only older, but may not be able to handle the speeds you pay for.

So, let us know in the comment if this article was of help to you. Also, how is your experience for solving ap currently not in use internet connection slow? Which method solved your problem? We will strive to reply to your feedback.

Fix iPad Unable to Join Network Problem

Sometimes, when you try to connect your iPad to the Wi-Fi network, it won’t get connected. It is quite annoying if you do not get connected to the internet.

We will look into the possible causes of network problems and how to fix this network issue.

Causes of iPad Unable to Join Network

Some of the most common causes of iPad unable to join the wireless network are listed below.

WI-Fi may be set to “OFF” in some cases, leading to wireless network connectivity problems. Wireless network signal strength problems are the cause of the error in some other cases.

Minor software problems with the Router or Modem may be the cause of network issues. Network settings of the iPad device can also cause network errors. Brocken Wi-Fi antenna is another cause of the error. A changed WiFi password is another cause of network connectivity errors.

How to Fix iPad Unable to Join Network Problem

Fix iPad Unable to Join Network Problem

The problem of the iPad unable to join the network can be fixed easily by different methods. Some of the methods to fix iPad network issues are listed below.

1. Set WiFi to ON

It is quite possible that you may have accidentally (or intentionally) made the WiFi to “OFF”. In such cases, do the following steps to fix the issue.

  • Go to the Settings app.
  • Tap on Wi-Fi.
  • Make sure that the Toggle bar is green in color. i.e. Wi-FI is set to ON.
  • Check if the network issue is fixed or not.

2. Force Restart iPad

Force restarting the iPad can fix network problems in many cases. This can be done as follows.

  • Press and hold the power button until the “Slide to Power Off” message appears on the screen.
  • Now, Drag the power icon slider from the left side to the right side, to shut down the iPad device.
  • Wait for a few seconds for the iPad to switch off.
  • Now, press and hold the power button, to make the iPad switch on.
  • Check if the network issue is resolved or not.

3. Remove Case or Covering from the iPad

The case or cover of the iPad may sometimes cause wireless network signal strength problems. Do the following to fix the issue in such cases.

  • Remove the case or covering from the iPad.
  • Check if the network issue is fixed or not.

4. Move Closer to the Router or Modem

The weak wireless signal can cause network issues, especially if you are away from the router or modem. TO fix this issue, do the following.

  • Move to a place that is close to the router or modem.
  • Check if you can get connected to the WiFi network or not.

5. Turn Wi-Fi Off And then Re-Connect

In some cases, iPAd WiFi needs to be switched off and then switched on to fix minor problems with network connectivity. This can be done as follows.

  • Open the Settings app.
  • Tap Wi-Fi.
  • Then, tap the toggle bar switch to the right of “Wi-Fi”, to turn it off.
  • Tap the same toggle bar again to switch it on.
  • Check if the network problem is resolved or not.

6. Power Cycling the Router / Modem

Sometimes, restarting the router or modem can fix the wireless network issues. This process is known as power cycling. Power cycling is to be done as follows.

  • Turn off the router or modem.
  • Unplug the power cable of the router or modem.
  • Wait for two minutes.
  • Reconnect the power cables.
  • Turn on the router or modem.
  • Check if the network issue is fixed or not.

7. “Forget Wi-Fi Network”

Sometimes, the Wi-FI password would have been changed recently. In such cases, it is not possible to get connected to the WiFi network with the stored password. You need to do the following procedure to get the WiFi network issue resolved in such cases.

  • Open the Settings app.
  • Tap on Wi-Fi.
  • Then, tap the blue “i” button next to the Wi-Fi network name.
  • Now, tap “Forget This Network”.
  • Your iPad will now restart.
  • Go back to the Wi-Fi menu inside the Settings app.
  • Tap on the name of your Wi-Fi network.
  • Enter the Wi-Fi password.
  • Check if the network connection issue is fixed or not.

8. Reset iPad’s Network Settings

Resetting the network settings of the iPad device can fix network issues in some cases. Wi-Fi, Bluetooth, etc, will be changed to the default factory settings, once you do resetting. To reset the network settings, proceed as per the instructions given below.

  • Open the Settings app.
  • Tap on “General”.
  • Then. tap on “Reset”.
  • Now, tap on “Reset Network Settings”.
  • Enter your iPad device passcode.
  • Tap on “Reset Network Settings” to confirm.
  • Your iPad will turn off now.
  • iPad will then turn on, with the default network settings.
  • Check if the network issue is fixed or not.

Note: After resetting the network settings, you need to re-enter the Wi-Fi password and also need to reconnect the Bluetooth devices.

9. Repairing iPad Wi-FI Antenna

In certain cases, the broken iPad Wi-Fi antenna may be the cause of network issues. To fix this issue, do the following.

  • Take your iPad to the nearest Apple Store.
  • They’ll fix the iPad. You may need to pay for the service.
  • Check if the iPad is able to join the network or not.

Conclusion: Occasionally, some iPad users complain that they are unable to join the network. In most cases, it may be due to Wi-Fi problems. Software glitches, Wi-Fi password changes, broken Wi-Fi antenna, iPad settings, etc, are some of the other causes of the network error.

iPad network connectivity problems can be fixed easily. Sometimes, the Wi-Fi may be set to “OFF”. in such cases, you need to make this value to “ON”. Restarting the iPad is the most simple fix to network issues. Turning off and then turning on the WiFi can fix the network error in many cases. Removing the iPad device cover or case can help fix network issues, especially if the wireless network signal is week. Moving closer to the router or modem is another fix to resolve the network issues. Restarting the router or modem is yet another fix tot he WiFi network issues.

If the stored WiFi password was changed, you need to update the stored passcode in your iPad device. This can be done by going in for the “Forget Wi-Fi Network” menu option and then re-entering the password. Resetting the network settings in your iPad device can fix network issues in some cases. Physical damages like a broken WiFi antenna can also cause network problems. Such problems can be fixed only by an Apple store.

How to Reset Network Settings in iPhone (iOS 13)

If you have not updated your iPhone or iPad to iOS 13 then you must do it immediately. iOS 13 brings a lot more features on iPhone and iPad that you can enjoy. It will make your life more easy on the go. Almost 50% of the people have upgraded to iOS 13 to enjoy new features. You simply need to go iPhone/iPad Settings >> General >> Software Update. Wait for update to download and then install automatically. It won’t delete any personal data of yours. However it will reset few settings in the process.

You may face certain problems with your WiFi network or bluetooth devices. Few people may face issues with cellular network. The solution to these problems is very simple. You simply need to reset network settings on your iPhone/iPad. iOS 13 makes it very simply to get rid of networking issues such as WiFi networks, hotspot, bluetooth devices, VPN etc..

Follow the below steps to reset network settings in iPhone/iPad (iOS 13):

  1. Go to “Settings” on your iPhone/iPad.
  2. Go to “General”.
  3. Tap on “Reset”.
  4. Tap on “Reset Network Settings” in the middle.
  5. It will ask for a passcode. Enter the passcode.
  6. Confirm once again that you want to reset network settings.
  7. Your iPhone/iPad will restart once you confirm and it will reset network settings.

You must be wondering what happens when you reset network settings in iOS 13. It’s a common question that many people ask. Reset network settings mainly deletes all saved Wi-Fi networks, paired bluetooth devices, cellular network settings, VPN settings and other network related settings. It brings them to default factory setting.

Once you reset network settings then you need to again enter password for your Wi-Fi network to join in. You need to save again. If you have applied any static IP or VPN settings then you have to do it again. It will start fresh.

The above settings method is applicable to latest iPhone 11/11 Pro/11 Pro Max, iPhone XR, iPhone X, iPhone 7, iPhone 6S, iPhone 8 and other iPhones where iOS 13 can be installed.

If you are still facing any problem then comment below so that we can help you out. Don’t forget to share this article.