Fix iPad Won’t Accept Wi-Fi Password Problem

Sometimes, the iPad devices refuse to accept the WiFi password. It will keep on asking you for the Wi-Fi network password. You will become frustrated after a few failed attempts.

We ill look into the causes of wireless password problems and how we can fix this issue.

Causes of Why iPad Won’t Accept Wi-Fi Password

There can be different reasons for the iPad not to accept the Wi-Fi password and refuse to get connected to the wireless network.

Minor software glitches, changed passwords, signal strength problems, etc, are some of the most common reasons for the iPad to not get connected to the Wi-Fi network.

How to Fix iPad Won’t Accept Wi-Fi Password Problem?

Fix iPad Won't Accept Wi-Fi Password Problem

There are different methods to fix the iPad won’t accept the Wi-Fi Password problem. Some of the fixes are listed below.

1. Force Restart the iPad

Restarting the iPad device can fix Wi-Fi password problems in many cases. This is known as force restarting and is done as follows.

  • Press and hold the power button (or side button), until you see the message “Slide to Power Off” on the screen.
  • Drag the power icon from left to right side.
  • Your iPad device will now switch off.
  • Press and hold the power button (or side button), to switch on the iPad,
  • Check if the Wi-Fi password issue is fixed or not.

2. Router or Modem Power Cycling

Restarting the router or modem after switching it off is known as power cycling. This process can help fix the Wi-Fi-related errors in a large number of cases. Power cycling is explained below.

  • Turn off your router or modem.
  • All power cables of the router or modem should be removed.
  • Re-connect the power cables, after two minutes.
  • Switch on the router or modem.
  • Check if the Wi-Fi network password issues are fixed or not.

3. Re-enter the Correct (Updated) Wi-Fi Password

Sometimes, the Wi-Fi password might have been changed, especially if you are trying to use the Wi-Fi network in your office. (You may not be aware of this change in the password if you are not in charge of the router or modem.) To fix this issue do the following.

  • If you are accessing the Wi-Fi from your office network, confirm the Wi-Fi password with the respective authority. Get the password in writing or by email or SMS to you, so that mistakes do not creep in.
  • Enter the given Wi-Fi password, when prompted.
  • Check if the password error is fixed or not.

4. Turn Wi-Fi Off And then Turn On

turning off and then turning on the iPad WiFi can fix minor problems with network connectivity. The procedure to do this is explained below.

  • Open the Settings app on the iPad.
  • Tap on “Wi-Fi”.
  • Tap the toggle bar switch to turn off the Wi-Fi.
  • Again, Tap the same toggle bar, to switch it on.
  • Check if the password error problem is resolved or not.

5. “Forget Wi-Fi Network”

Sometimes, “Forget This Network” option can help you to fix the iPad password errors. You need to do the following procedure to “Forget This Network”.

  1. Open the “Settings” app on your iPad.
  2. Tap on “Wi-Fi”.
  3. Tap on the blue “i” button, next to your Wi-Fi name.
  4. Next, tap on “Forget This Network”.
  5. Your iPad will now restart now.
  6. Repeat step 1 and step 2.
  7. Tap on the name of the Wi-Fi network.
  8. Enter the Wi-Fi password.
  9. Check if the password issue is fixed or not.

6. Reset Network Settings of the iPad

Resetting the iPad’s network settings can resolve password errors in many cases. Wi-Fi, Bluetooth, etc, changes to default factory settings, once you do the network resetting. Proceed as per the instructions given below to do the network resetting.

  • Open the Settings app on the iPad.
  • Tap on the “General”.
  • Tap on the “Reset”.
  • Next, tap on the “Reset Network Settings”.
  • Enter the passcode for the iPad device.
  • Again, tap on “Reset Network Settings”, to confirm.
  • Your iPad will turn off and turn on.
  • Check if the password issue is fixed or not.

Note: After resetting the network settings, you need to re-enter the Wi-Fi password and also need to reconnect the Bluetooth devices.

7. Turn Airplane Mode on/off

Turning Airplane Mode on and then making it off fixes the WI-Fi password errors for some iPad users. This is explained below.

  • Open the Settings app on the iPad.
  • Turn on the Airplane Mode.
  • Wait a few seconds.
  • Now, turn off Airplane Mode.
  • Check if the Wi-Fi password error is fixed or not.

8. Firmware Update for the Router

As one of the last resorts to resolve the WI-Fi Password error, you may need to update the firmware of the Router or modem. Note: This action may cause irrecoverable damage to the network settings and should be done by only those are experienced with such things.

  • Read the manuals supplied with the router or modem. Follow the instructions as per the manual.
  • In case of any clarifications, visit the support section on the manufacturer’s website. Raise a ticket and wait for the support team to come up with the required solution.
  • Check if the problem is fixed or not.

Conclusion: Rarely, some iOS Devices like iPad won’t accept the Wi-Fi password at certain times. This problem is caused by different reasons like some minor software errors, password changes, signal strength problems, etc. It can be fixed easily,

Restarting the iPad is a very simple fix that works in many cases. Power cycling the router or modem is another fix. Reentering the correct Wi-Fi Password is another fix. Turning off and turning on the Wi-Fi is yet another solution. “Forget This Network” menu option can fix the iPad password errors in a large number of cases. Resetting the iPad’s network settings is another fix. Turning the Airplane Mode on and then to off, the issue with WiFi password problems can be fixed in some cases. Firmware update for the router or modem may be required in some cases to fix the iPad Won’t Accept Wi-Fi Password issue.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.